Parameters Introduction：
B NSPT-LOCKS is a commonly used standard type locks. If this type lock is used, the machining precision
of the joint components can be reduced since over-consideration of the interference and precision will
make no difference in use. The reasonable reduction of the precision will further reduce the machining
time and costs.
By using B NSPT-LOCKS, self-installation can be easily performed. The strength of the connection is
dependent on the frictional forces between the lock, the hub and the shaft.It is one type of non-clearance
joint that requires no keys.This will save even more time and costs since no key machining, pressing
installation， or heat installation are required. Its great stability can greatly increase the working efficiency
and the expected lifetime of mechanisms.
Product range：
Standards | Series Type | SizeRange |
ANSI | B | NL0.34B to NL5.00B |
DIN | B(Z2) | CL19x47B to CL1000x1110B |
ANSI Catalog:
ANSI B(Z2) Type CAPT-LOCKS.pdf
DIN Catalog:DIN B(Z2) Type CAPT-LOCKS.pdf
